Qoltec Hybrid Solar Inverter Off-Grid 1.5kVA | 1.5kW | 80A | MPPT | Sinus

Qoltec Hybrid Solar Inverter Off-Grid 1.5kVA | 1.5kW | 80A | MPPT | Sinus

Product code: 53875

The off-grid hybrid inverter converts the energy created by PV modules into energy needed to power electrical appliances. It works as a solar charger and battery charger. Equipped with a multifunctional LCD display that records operating data allowing continuous monitoring and management of the entire system. The inverter operates in off-grid mode. Does not support BMS.
It has a built-in 80A MPPT charge controller. Possibility to connect an additional wi-fi module.
Possibility to connect a compatible wi-fi module: product code 53962

How does the off-grid hybrid inverter work?

inwerter

The efficiency of a solar PV system depends on the selection of the right inverter, or solar inverter. The inverter performs a key function in this system, changing the DC current generated by the solar PV panels into AC current used by household appliances. The off-grid hybrid inverter combines the solar PV system, energy storage and the power grid. During the day, it charges the energy storage from the photovoltaic panels. The energy storage unit powers household appliances from the stored energy during the day, and when the batteries are discharged, it draws energy from the grid. The inverter works in off-grid mode, using excess solar energy to power consumers and charge the battery. In the event of an emergency, current is drawn from the solar PV system to the energy storage and can safely and uninterruptedly ensure the continuous operation of our appliances.
Why should you choose a hybrid inverter ?

inwerter - Pure sine wave inverter,
- automatic restart during power restoration,
- easy-to-read multifunction LCD display,
- 80A MPPT charge controller,
- ability to be powered by mains or generator,
- ability to change AC/Solar charger priority settings via LCD display,
- intelligent charger design for optimal battery performance,
- configurable input voltage range for home appliances and personal computers using the settings on the LCD display panel,
- configurable battery charging current according to devices and personal computers via settings on the LCD display panel,
- protection against overload, overheating, overcharging and short circuit,
- cold start function,

Maximize the possibilities with MPPT technology

mppt The battery charging inverter uses a state-of-the-art 100A MPPT charge controller to maximize the power drawn from the photovoltaic panels, using advanced maximum power point tracking technology.

Having this feature significantly affects the efficiency of the photovoltaic installation-they can maintain high power even in low sunlight conditions. In addition, the controller controls the battery operation and charging process and protects the battery from damage.

MULTIFUNCTION LCD DISPLAY

inwerter The product is equipped with a multifunctional, easy-to-use LCD display with control panel. Facilitates monitoring of the entire photovoltaic installation . Allows you to configure the input voltage range for home appliances and personal computers or change the priority settings of the AC/Solar charger. In addition, the display records data and informs about failures, reacting accordingly if any of the parameters exceed the norm. If a fault occurs, the inverter shuts down.

Confidence confirmed by a warranty
Get clean energy with our solar inverters! Product comes with a 24 month warranty from the date of purchase.
 
Technical data
Producer
Qoltec
Type
Off-Grid
Phase
1
Rated Power
1500VA/1500W
Input parameters
Nominal Input voltage
230VAC
Input Voltage Range
120 - 450 VAC
Working frequency
60/50 HZ
Output parameters
Efficiency
95%
Transfer time
10 ms (PC) 20 ms (home appliances)
Waveform
Pure sine wave
BATTERY PARAMETERS
Type of charging
MPPT
Battery voltage
12 VDC
Battery charging voltage
13,5VDC
Variable charging voltage
13,5VDC
Battery overcharge protection
15.5VDC
Maximum battery charging current from PV
80 A
Built-in battery
No
Work without battery
No
PV PARAMETERS
Maximum PV array open circuit power
2000W
Maximum solar charge current
80A
MPPT STARTING VOLTAGE
120V
MPPT operating voltage range
120 ~ 430VDC
Maximum PV array open circuit voltage
450 VDC
OTHER PARAMETERS
Screen
LCD
Interface
RS232
Connector diameter
M6 - 6 mm
Cooling system
2 x fan
Noise level
45 dB
Protection
Anti-short-circuit
Against overheating
Against overload
Against overload
Colour
White, black
Additional information
Possibility to connect an additional wi-fi module.
Does not support LiFePO4 batteries
Does not support BMS
Notices
We require the device to be installed by a qualified installer with the appropriate authorization. In case of installation by unauthorized persons, the warranty will automatically expire.
The included protocol is an integral part of the warranty and is necessary to file a claim for defective goods within 24 months from the date of purchase.
Working temperature
-10˚C ~ +50˚C
Storage temperature
-15˚C do +60˚C
Storage humidity
10-90% without condensation
Size
348 x 270 x 95 mm
Package contents
Solar inverter
RS232 communication cable
User manual
CD
Device installation protocol
Warranty card
Package depth / length [mm]
410
Package height [mm]
175
Package width [mm]
350
Net weight [kg]
4.93
Gross weight [kg]
5.79
Certificate
CE
Warranty
24 month
EAN code
5901878538754
Technical support

If you have problem with this product please contact us using this form.
You can also contact us using telephone, phone numbers are in contact.

I have problem with this product
Retail sales

You can find our product in well known stores with electronic equipment.

Wholesale

Ntec is an exclusive distributor of Qoltec product in Poland www.en.b2b.ntec.eu

Safety information
English safety information